Each character is an independent solar lighting system, so there is no power cable to route through the wall and no disposable battery replacement routine.
Choose a character to view its SKU image.
LINKSOLAR · LUMA SERIES
Luma Solar House Number Lights
A house number that charges itself in daylight.
Individual solar-powered numbers and letters that illuminate your address after dark—without running external power wiring to the wall.
BC Solar Cell1500mAh BatteryAutomatic Light Sensor3 Light Modes
$69.90 USD$89.99 USDper character
1
Enter your complete addressWe will prepare every character for you.
Available: 0–9 and letters A, B, C, D, S. Spaces are ignored.
2
Review your setEach tile is one independent solar light.
Your set4 characters
Total$63.60 USD
All characters in stockShips from Dongguan, China
Number of complete sets
Need one replacement character? Buy a single character
Single-character quantity
Place each solar face where it can receive sufficient direct sunlight. Charging and lighting time vary with weather, season, shade, selected mode and battery condition.
No external power wiringSolar panel, battery and LEDs are integrated into each character.
Screw-mountedUse suitable fixings for the mounting surface.
Product supportSetup and troubleshooting available from LINKSOLAR Support.
DAYLIGHT IN · ADDRESS LIGHT OUT
Solar by day.
Visible after dark.
Each character collects available sunlight during the day, stores it in a rechargeable battery and illuminates the address as the surroundings become dark.Each character stores solar energy by day and lights your address automatically after dark.
BC SOLAR TECHNOLOGY
A cleaner solar face.
BC back-contact solar cell technology moves electrical contacts away from the front face. The clean surface reduces visible grid lines and blends into the character design.
- Integrated charging surface
- No external power wiring at the wall
- Clean front without traditional visible grid lines
DAYLIGHT STORED FOR THE NIGHT
Collect by day.
Shine for over 10 hours.
The solar surface converts available daylight into electricity and stores it in the built-in 1500mAh rechargeable battery. After dark, that stored energy powers the light automatically.
- Collect daylight
- Store energy in the battery
- Sense darkness
- Light automatically
With sufficient daytime sunlight, stored energy supports the number light for over 10 hours after dark.
Lighting time varies with sunlight, season, shade, selected mode and battery condition.
AUTOMATIC AT NIGHT · YOUR CHOICE OF LIGHT
One light sensor.
Three selectable colors.
The light turns on automatically after dark. Use the switch on the product to choose warm, white or mixed light—there is no color choice required when ordering.
SIMPLE CONTROLS
Choose the light. Let the sensor handle the night.Choose your light color.
The rear sliding switch provides Off, warm 2700K, white 5000K and mixed-light settings. Once selected, no app or nightly timer programming is required.
Nearby porch or street lighting may affect when the sensor detects darkness.
SIZE & NIGHTTIME VISIBILITY
Plan the space.
See the address.
Check the character dimensions before drilling, then choose a position with a clear approach view and sufficient daily sunlight.
Actual character dimensions
Approximately 6.7 in tall.
Characters are approximately 170.17 mm high. Most are approximately 116.87 mm wide; the number 1 is approximately 90.37 mm wide. Leave even spacing and confirm the complete address fits before drilling.
Night approach reference
Designed to help the address stand out after dark.
The supplied scene illustrates visibility from approximately 39 ft / 11.9 m. Actual readability varies with character count, installation height, viewing angle, ambient lighting and weather.
SCREW-MOUNTED INSTALLATION
Plan the spacing. Secure each character.
Use fixings suited to the wall material and install each solar face where it can receive clear daily sun.
- 01Mark the mounting points with the positioning guide.
- 02Drill and secure suitable wall fixings.
- 03Select the preferred light mode.
- 04Slide each character onto its mounts and check it is secure.
Adhesive or no-drill mounting is not claimed.
OUTDOOR PLACEMENT
Made for the wall. Keep the solar face clear.Made for outdoor walls.
The current manual identifies IP65 protection. Install as directed, keep the solar surface clean and never submerge the light.
PLACEMENT INSPIRATION
See the address in context.
These residential examples help compare horizontal and vertical layouts across walls, pillars, fences and entrances.
Swipe to explore everyday uses →
House wallEntrance pillar
Horizontal groupingVertical grouping
Keep the characters aligned and leave even spacing between each unit.
Entrance pillar
Vertical address
A vertical arrangement works well where the mounting surface is narrow.
Gate markerHouse wall
Visible from the approachHorizontal address
Choose a position that is easy to see and still receives sufficient sunlight.
Front entrance
Close to the doorway
Check nearby porch lighting because it may affect the automatic sensor.
Night reference
Warm or white illumination
Select the mode that suits the exterior finish and desired visibility.
Residential exterior
Plan before drilling
Preview the complete address and spacing before marking the wall.
PACKAGE & IN THE BOX
Know what arrives.
Each character is packed separately with the materials needed to position and screw-mount that individual light.
Single-character package
185 × 125 × 36 mm
Approximately 7.28 × 4.92 × 1.42 in for each individually packed character.
Included with each character
Light, mounting kit and guides.
One solar house number or letter light, mounting accessories and screws, user manual, product warranty card and measuring/positioning guide.
CONFIRMED ESSENTIALS
What we can state clearly.
Each selected character is sold as one light. Enter your complete address to order all required characters; repeated characters are counted separately.
- Characters
- 0–9 and A, B, C, D, S
- Character height
- Approximately 170.17 mm / 6.7 in
- Light modes
- 2700K warm · 5000K white · mixed · off
- Battery per light
- AA button-top 1.2V 1500mAh Ni-MH
- Solar charging
- Approximately 4–5 hours under suitable sunlight
- Lighting time
- Up to 12 hours under sufficient sunlight
- Control
- Rear sliding switch and automatic light sensor
- Installation
- Screw-mounted wall fixtures
- Protection
- IP65 stated in current manual; do not submerge
- Documented construction
- ABS + PC + PP components
FAQ
Questions before you choose?
Direct answers about sunlight, operation and installation.
Does each character need an outlet or power wire?
No. Each character integrates its own solar surface, rechargeable battery and LEDs. It still needs sufficient sunlight and secure screw mounting.
Does it turn on automatically?
Yes, after you select a light mode. The light sensor turns the LEDs on as the surroundings become dark and off again in daylight.
How long does it stay lit?
The manual lists up to 12 hours under sufficient sunlight. Actual runtime varies with weather, season, shade, selected mode and battery condition.
What battery does it use?
Each light uses one AA button-top 1.2V 1500mAh Ni-MH rechargeable battery. Contact support before opening the housing or replacing the battery.
Can it be installed without drilling?
The documented installation uses wall mounts and screws. No-drill or adhesive mounting is not currently supported.
Where should I install it?
Choose a location where the solar face receives unobstructed daily sunlight and where nearby artificial lighting will not prevent the sensor from detecting darkness.
Can it be used in rain?
The current manual states IP65 protection for directed outdoor use. Do not submerge the product, and follow the installation and care guidance.
Where can I get setup help?
Visit Luma Product Help for installation, sunlight placement and troubleshooting guidance. Download the English Luma manual (PDF, 8 pages).
